国产偷国产偷亚-国产无码18p-国产无码av-国产无码不卡-国产无码二区三区-国产无码高清

NAWS南澳電氣SF6微量水份測試儀

產品簡介

NAWS南澳電氣SF6微量水份測試儀是南澳最研發的現代化、高水平、智能型測量儀器。NAWS系列SF6微水測試儀無論從測量原理、自動化程度、使用的方便性而言都有著同類儀器無法比擬的前端性，特別是采用了歐洲標準技術，確保數據準確可靠。NAWS南澳電氣SF6微水測試儀測量范圍寬、響應時間快、測量周期短，顯示直觀，操作簡便。該儀器適用的領域非常廣泛，空氣、氮氣、惰性氣體以及任何不含腐蝕性介質的氣體的濕度測量，尤其適合于SF6氣體的濕度測量，電力、石化、冶金、環保、科研院所等部門均可采用，有著極高的性價比。

產品別名

智能微水測量儀，微水測量儀，微質量測量儀，微水儀

產品特性

1.快速測量：開機后無須預加熱，快速達到露點飽和狀態。

2.快速省氣：測定時耗氣僅2L（101.2kPa）左右。

3.自鎖接頭：采用德國原裝進口自鎖接頭，安全可靠，無漏氣。

4.數據存儲：采用大容量設計，最多可存儲60組測試數據。

5.顯示清晰：液晶屏直接顯示露點、微水（ppm）、環境溫度、環境濕度、 時間及日期、電池電量等內容。

6.便攜式設計：儀器更輕，攜帶、使用方便。

7.內置電源：內置可充電電池，一次充足可連續工作8小時。

產品參數

NAWS Series SF6 Trace Moisture Tester

Product introduction 

NAWS Series SF6 Trace Moisture Tester is a high-level, intelligent measuring instruments. Especially with the technology of European standard, ensure the data accurately and reliably. NAWS Series has large measurement range, fast response time, the short measurement cycle, intuitive display, easy to operate. The instrument is suitable for wide range of areas, air, nitrogen, inert gas, as well as non-corrosive gas medium humidity measurement, especially for humidity measurement of SF6 gas. Highly cost effective makes it widely used in electric power, petrochemical, metallurgy, environmental protection, research institutes and other departments.

Also called name

Smart micro water meter, moisture meter, micro-quality meter, moisture meter, NAWS Series SF6 Trace Moisture Tester

The Characteristics of the products 

1. Portable design: lighter, portable, easy to use.

2. Measuring fast: no need to wait, can get the humidity data quickly after the boot.

3. Cost saving: gas consumption only 2L (102kPa) when measurement.

4. self-locking connectors: Germany imported self-locking connectors, safe and reliable, no leaks.

5. Data storage: design of large capacity, can store up to 50 groups of test data.

6. Showing clear: the LCD display directly to the dew point, moisture (ppm), ambient temperature, humidity, time and date, battery and so on.

7.RS232 interface: can be connected with the serial printer for data printing.

8. built-in power supply: Built-in rechargeable lithium battery 4Ah, can continuous work for 10 hours once fully charged.

The parameters of the products

1. Measuring range:-60℃~+20℃(dew point)

2. Accuracy: ±2℃ (-60℃~-50℃)

          ±1℃ (-49℃~+20℃) (operating range)

3. Measuring time: ≤ 3 minutes each point

4. Sampling flow rate: 300 ml/min±20%

5. Display: LED display, with led back-light, English interface, can design English interface according to customer’s requirement.

6. Power Supply: AC-DC dual-use, rechargeable battery can work continuously for eight hours

7. Terms of inspection: self-calibration function when boot.

8. Weight: 3.5KG

9. Dimension: 250mm*100mm*300mm(L*W*H)

Product information

1, NAWS Series SF6 trace water tester should be placed in a secure location to prevent the break and avoid vigorous shaking.

2, Do not measure corrosive gases.

3, The flow valve should be opened slowly when adjust the gas flow, so that the flow directions at 0.5 liters / minute.

4, Fully charged before use. Access to 220V, no need to open the power switch, the instrument will be charged automatically, usually takes more than 20 hours.